Dear friends and valued customers,
Covid-19 update 22th July 2021
We have again increased our safety measures and reviewed our already comprehensive procedures. If you are collecting please only collect at the time booked i.e. 9am collection would be 9am > 9:45am, we must minimise multiple customers in the yard together.
Southgate Timber’s showroom remains closed
Collections must be pre-ordered on our website. Book a collection slot on checkout. Typically 1 - 2 working days
Shop products ordered alone, lead time 3 working days
Collection customers please ensure you wear a mask at all times especially when entering the office to collect paperwork. I am afraid our toilets remain closed to customers. Thanks for your understanding.
Thank you for your patience and understanding, the team we have are working with total commitment to the challenge.
Best wishes to all and stay safe – the team at Southgate Timber.
Home > Spax Screws and Owatrol Treatment > Owatrol Treatment & Accessories > Aquadecks - Honey
Thermo wood and Broad leaved woods (Oak, Ash, Beech, Maple….)
RECOMMENDATIONS BEFORE APPLYING
Surfaces must be thoroughly clean, dry and free of dirt, grease, grime, mildew and previous coatings
Wood must be dry (max. 18% moisture content)
Do not apply in direct sunlight or to hot surfaces.
Do not apply if cold and/or wet weather is expected within 12 hours. Be aware of early morning dew.
Cover everything you do not wish to coat, including plants and shrubs.
Ensure timber if free of all factory applied sealens or finishes.
Mix thoroughly before and periodically during application. Do not thin.
Apply a liberal application of AQUADECKS working in direction of grain and working an area that you can complete in 30 min.
Apply 2nd application as soon as wet look of 1st application has disappeared and allow to penetrate (15 – 20 minutes)
Wipe up any excess that has not penetrated or brush out to areas where product has penetrated, in order to avoid AQUADECKS drying as shiny spots on the surface. AQUADECKS place is in the wood not on the surface.
After spray application, always back-brush or back-roll to improve penetration, coverage and uniformity of color.
Do not allow to become Touch Dry or Dry between applications